RANCANG BANGUN PEMILAHAN SAMPAH OTOMATIS ORGANIK DAN ANORGANIK MENGGUNAKAN SENSOR MIKROKONTROLER (ARDUINO UNO)
DOI:
https://doi.org/10.59819/jmti.v16i1.6223Keywords:
Arduino, Sampah, Sensor Ultrasonic HC-SR04, Sensor Proximity , Motor Servo Sg90Abstract
Abstract.
Technology is currently developing very rapidly. The rapid development of technology in the modern industrial era has resulted in a wide variety of technologies, from newly discovered technologies to technologies that are developments of previous ones.
Therefore, this research aims to design and build an automatic waste sorting system based on an Arduino Uno microcontroller, utilizing sensors as the primary tool. This tool is designed using several key components, including an HC-SR04 ultrasonic sensor as a distance detector, a servo used to control the trash bin lid or actuator, and a proximity sensor used to separate organic and inorganic waste. The automatic waste sorting bin has two compartments for organic and inorganic waste and a single entrance for waste disposal. This microcontroller-based trash bin uses a prototype method.
The automatic organic and inorganic waste management model uses microcontroller sensors (Arduino Uno) to reduce indiscriminate waste disposal. Test results show that the system can detect and sort waste with a fairly good level of accuracy and fast response times.
Downloads
References
Amin, M., Ananda, R., Muflih, H., Arif, M. (2022). Pengenalan Teknologi Microcontroller Dengan Kompetensi Pembuatan Tong Sampah Pintar Pada Siswa Kelas XI SMKN 2 TanjungbalaI. In Jurnal Pemberdayaan Sosial dan Teknologi Masyarakat (Vol. 2, Issue 2). http://jurnal.goretanpena.com/index.php/JPSTM
Hildegardis Bere, S., Mahmudi, A., & Sasmito, A. P. (2021). Rancang Bangun Alat Pembuka Dan Penutup Tong Sampah Otomatis Menggunakan Sensor Jarak Berbasis Arduino. In Jurnal Mahasiswa Teknik Informatika) (Vol. 5, Issue 1).
Sanjaya, H., Daulay, N. K., Trianto, J., & Andri, R. (2022). Tempat Sampah Otomatis Berbasis Mikrokontroler Arduino. JURIKOM (Jurnal Riset Komputer), 9(2), 451. https://doi.org/10.30865/jurikom.v9i2.4058
Sukarjadi, Arifiyanto Arifiyanto, Deby Tobagus Setiawan, Moch Hatta (2017). Perancangan Dan Pembuatan Smart Trash Bin Di Universitas Maarif Hasyim Latif. Engineering and Sains Journal, https://e-journal.umaha.ac.id/teknika/article/view/123
Sohor, S., Mardeni, Irawan, Y., & Sugiati. (2020). Rancang Bangun Tempat Sampah Otomatis Mengunakan Mikrokontroler Dan Sensor Ultasonik Dengan Notifikasi Telegram. Jurnal Ilmu Komputer, 9(2), 154–160. https://doi.org/10.33060/jik/2020/vol9.iss2.182
Lahart, J. (2017, September 4). Taking an Open-Source Approach to Hardware. Diambil kembali dari Wall Street Journal: https://www.wsj.com/articles/SB10001424052748703499404574559960%20271468066
Nabila Oper , Govinda Jibrillah Hasan. (2021). Rancang Bangun Buka Tutup Tempat Sampah Otomatis Berbasis Arduino. (Jurnal Informatika Teknologi dan Sains), Vol. 3 No. 3. Repository Universitas Muria Kudus
Kiki Fatmawati, Eka Sabna, Muhardi, Yuda Irawan. (2020). Rancang Bangun Tempat Sampah Pintar Menggunakan Sensor Jarak Berbasis Mikrokontroler Arduino. (Riau Journal of Computer Science Vol.06 No.02 Juli Tahun.2020). 124 -134 |124. Microsoft Word - 06. muhardi.doc
Ajar Rohmanu.,David Widiyanto. (2018). Sistem Sensor Jarak Aman Pada Mobil Berbasis Mikrokontroller Arduino Atmega328. Jurnal Informatika Simantik Vol. 3 No. 1 https://simantik-pancasakti.ac.id/index.php/simantik/article/view/23/23
Kurniati. (2021). Penerapan Metode Prototype Pada Perancangan Sistem Pengarsipan Dokumen Kantor Kecamatan Lais Vol 2 No.1 https://journal-computing.org/index.php/journal-sea/index
Rosenblatt, H. J. (2012). Systems Analysis and Design (9th ed.). Cengage Learning.
Indra Sutrisno (2021). Observasi Penanganan Dan Pengurangan Sampah Di Universitas Singaperbangsa Karawang Vol. 8 No. 4 http://jurnal.um-tapsel.ac.id/index.php/Justitia
Downloads
Published
Issue
Section
License
Copyright (c) 2026 I Putu Surya Adiputra, Gde Iwan Setiawan, Ni Luh Gede Ambaradewi, I Gede Putu Megayasa
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Authors who publish with the Jurnal Manajemen dan Teknologi Informasi agree to the following terms:
1. Authors retain copyright and grant the journal the right of first publication with the work simultaneously licensed under a Creative Commons Attribution License (CC BY-SA 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work. (See The Effect of Open Access) .
